Notes
DTF Transfer Instructions
Heat Press Instructions
Pressure Setting: Set the heat press to medium pressure.
Temperature:
For cotton and 50/50 blends: 139°C (282°F)
For synthetic or polyester fabrics: 139°C (282°F)
Press Time:
For cotton and 50/50 blends: 9 seconds
For synthetic and polyester fabrics: 6 seconds
Press the transfer to the fabric for the specified time based on the fabric type.
Hybrid Peel: Peel while still hot or after it has cooled, in one continuous, smooth, rapid motion.
For Enhanced Durability:
Cover the image with parchment paper after peeling and press again for 5 seconds.
Iron-On Instructions
Temperature: Set the iron to the highest setting.
Press for 20 to 25 Seconds: Apply even pressure to all parts of the design for 20 to 25 seconds.
Hybrid Peel: Peel while still hot or after it has cooled, in one smooth, continuous motion.
DTF Print Aftercare Instructions
Wait 24 Hours: Let the print set for at least 24 hours before washing.
Wash Inside Out: Turn the garment inside out to protect the design.
Cold Water Wash: Use cold water on a gentle cycle.
Mild Detergent: Avoid bleach and use color-safe detergents.
Avoid Fabric Softeners: They can degrade the print.
Hang Dry: Air dry if possible. If using a dryer, tumble dry on low.
Do Not Iron Directly: Place cloth over the design if ironing is needed, and use low heat.
Bring your designs to life with our custom DTF transfers by size and ensure a professional finish every time. Order now!